skip to content
Ben's notes
Linux, Unix, network, radio...
User Tools
Log In
Site Tools
Search
Tools
Show page
Backlinks
Recent Changes
Media Manager
Sitemap
Log In
>
Recent Changes
Media Manager
Sitemap
Trace:
pc_engines_apu2_arch_linux
=====PC Engines APU2 - Arch Linux===== ====Set-up==== * Connect 12V, serial console and networking. * Optional: [[firmware_update_pc_engines_apu|Update APU2 BIOS]]. ====Bootable USB drive==== * Download the latest ISO image from [[https://www.archlinux.org/download/]]. * Verify the SHA sum. * Copy image to USB. ====Boot Arch Linux from USB==== * Boot the APU2 and press F10, select USB boot. * Switch console to 38400 baud. Press 'ctrl-l (lima)' to redraw the screen. * Select the ''Boot Arch Linux'' option and press ''TAB''. * Add ''console=ttyS0,38400'' to the kernel line and press ''enter'' {{:private:screenshot_from_2017-05-26_19-14-16.png?nolink|}} * Log in with user ''root'' (no password). * If you connected the network cable after booting, request an IP-address <code># dhclient enp1s0</code> * Install and run SSHd to complete the installation over SSH:<code> select nearby mirror in: /etc/pacman.d/mirrorlist # pacman -Sy # pacman -S openssh # passwd root # systemctl start sshd</code> ====Install Arch Linux==== * [[https://wiki.archlinux.org/index.php/installation_guide]] * Configure serial console, when still in chroot and just before the reboot.<code> # /etc/default/grub # add options below GRUB_CMDLINE_LINUX="console=tty0 console=ttyS0,115200n8" </code> * Configure grub and serial:<code> # /etc/default/grub # add options below ## Serial console GRUB_TERMINAL_output=serial GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1" </code> * Make new grub config:<code># grub-mkconfig -o /boot/grub/grub.cfg</code> * Reboot and connect with 115200 baud. {{tag>[hardware apu arch linux]}}
pc_engines_apu2_arch_linux.txt
ยท Last modified: 2021/10/09 15:14 by
127.0.0.1
Page Tools
Show page
Backlinks
Back to top