{{tag>[archlinux network bonding]}}

=====Archlinux - LACP 802.3AD Bonding / VLANs=====

====Configure bonding with netctl====
  * Make sure you can access the server over serial.
  * Configure LACP on your switch.
  * Edit /etc/modprobe.d/bonding.conf: <code>options bonding mode=802.3ad miimon=100</code>
  * Create /etc/netctl/bonding: <code>Description='Bond Interface'
Interface='bond0'
Connection=bond
BindsToInterfaces=('eno1' 'enp4s0' 'enp2s0f0' 'enp2s0f1')
IP=no</code>
  * Enable the new profile, for example:<code>netctl enable bonding</code>
  * Test bonding mode:<code>less /proc/net/bonding/bond0</code>
====Add VLANs====
  * Create /etc/netctl/vlan10, for example:<code>Description='VLAN 10'
Interface=bond0.10
Connection=vlan
BindsToInterfaces=bond0
VLANID=10
IP=static
Address="192.168.0.100/24"
Gateway="192.168.0.1"
DNS=("192.168.0.2")
Hostname="myhost"
DNSDomain="mydomain.com"
DNSSearch="mydomain.com"
</code>