{{tag>[archlinux serial console]}}

=====Archlinux - Serial Console over LAN=====

====Configure serial console====
  * Configure BIOS, enable Serial Over LAN (SOL) redirection, settings: 115k2, 8n1.
  * Edit /etc/default/grub: <code>GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=ttyS2,115200n8"
## Serial console
GRUB_TERMINAL=serial
GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=2 --word=8 --parity=no --stop=1"</code>
  * Rebuild the grub.cfg file with following command: <code>grub-mkconfig -o /boot/grub/grub.cfg</code>
  * Reboot.

====Test serial connection====
  * SSH to ipmi address.
  * Open SOL: <code>cd system1/sol1
start</code>
  * To exit, press: <enter> <esc> <T>.