=====PC Engines APU2 - Sophos UTM 9 Free Home===== This how-to was made using the following items: * PCEngines APU2 board. * 16GB SSD (64GB would be better). * USB Drive (USB2 installation media). * USB Keyboard (only for installation). * Sophos UTM 9 (asg-9.506-2.1) ISO. * Network connected to first interface (next to serial port). Lessons learned: * Install is a bit difficult. * Snort takes a lot of CPU (>90% on a single thread), during a speedtest download speed is now around 50mbit instead of 120. Intrusion Prevention active with 1718 of 31918 patterns. {{::screenshot_from_2017-12-23_09-16-11.png?nolink|}} **Prepare** * Register and download ISO [[https://www.sophos.com/en-us/support/utm-downloads.aspx]]. * Log in and download license file. * Check MD5 sum. * Modify downloaded ISO:isohybrid asg-9.506-2.1.iso * Copy ISO to USB drive:sudo dd if=asg-9.506-2.1.iso of=/dev/sda bs=1M status=progress && sync **Install** * Boot APU2, press F10 and select USB drive. * At the welcome screen (Welcome to Sophos UTM 9!), press F3 * Enter: default console=ttyS0,115200 * * * Keyboard settings * Timezone * Date / Time * Network * 64 bit kernel * All capabilities * Press ''alt-f2'' and type the following, **in the blind and before partitioning the hard drive**: beep # To confirm you are typing in a shell ifconfig eth0 up # Up the first interface ifconfig eth0 1.2.3.4/24 # Use free IP-address in your subnet # Test ping from other machine. passwd root # Then enter new root password twice /etc/init.d/dropbear start # Start SSHd * Log in, using SSH, from another machine. * Mount USB to /install:mount -t iso9660 -o loop /dev/sdb1 /install * Press ''alt-f1'' and continue with the installation. It will take around 15 minutes to install. * After boot you will hear a few beeps. * Open the webgui to continue configuration. {{tag>[hardware APU2 Sophos UTM]}}