Make sure you can access the server over serial.

Configure LACP on your switch.

Edit /etc/modprobe.d/bonding.conf:

options bonding mode=802.3ad miimon=100

Create /etc/netctl/bonding:

Description='Bond Interface'
Interface='bond0'
Connection=bond
BindsToInterfaces=('eno1' 'enp4s0' 'enp2s0f0' 'enp2s0f1')
IP=no

Enable the new profile, for example:

netctl enable bonding

Test bonding mode:

less /proc/net/bonding/bond0

Create /etc/netctl/vlan10, for example:

Description='VLAN 10'
Interface=bond0.10
Connection=vlan
BindsToInterfaces=bond0
VLANID=10
IP=static
Address="192.168.0.100/24"
Gateway="192.168.0.1"
DNS=("192.168.0.2")
Hostname="myhost"
DNSDomain="mydomain.com"
DNSSearch="mydomain.com"