Connect to the serial port on the back of the P2000T.

On the P2000T, set output to the maximum speed of 2400 baud

POKE &H6016,0

Set speed on Linux host, cat output:

stty -F /dev/ttyUSB0 ispeed 2400
cat /dev/ttyUSB0

On the P2000T, press <shift><00> (printer key). The current screen will be printed over serial.

Dump complete BASIC program to serial. Load cassette program on P2000T and print:

CLOAD "program"
LLIST

Catch the whole file, when finished, press ctr-c:

tee program.bas </dev/ttyUSB0

Load serial.bas program on the P2000. By: Marcel de Kogel:

CLOAD "serial"

Insert cassette to be dumped.

Prepare system to receive file:

(stty raw; cat > side-a.cas) < /dev/ttyUSB0

# or pipe through hexdump to see the data flow
(stty raw; tee -a dump.cas | hexdump -C) < /dev/ttyUSB1

On P2000T:

run<enter>