Differences

This shows you the differences between two versions of the page.

--- apcupsd [2014/06/10 20:23] – [APCUSPd CentOS 6.5] admin
+++ apcupsd [2021/10/09 15:14] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 {{tag>[ups apc centos]}}
-~~TOC~~
 =====APCUSPd CentOS 6.5=====
 This guide will let you configure apcupsd using PCNET broadcasts from the UPS network management card.
@@ Line 6: / Line 5: @@
 Prerequisites:
   * EPEL repo
-  * APC UPS with network management card 2
+  * APC UPS with network management card 2, firmware 6.1.1.
 ====Configure APC network management card to allow PCNET connection====
 PCNET is UDP broadcast communication over port 3052. If you use a firewall, open communication for this port.
-  * Goto UPS -> Shutdown, enter 16 character shutdown phrase, hit apply.
+  * Configuration -> Shutdown, disable Basic Signaling Shutdown.
-  * PowerChute clients -> add client IP address.
+  * Configuration -> Shutdown, enter 16 character shutdown phrase.
+  * Configuration -> Shutdown, username: device.
+  * Configuration -> PowerChute clients -> add client IP address.
 ====Install and configure apcupsd====
   * Install apcupsd. <code>yum install apcupsd</code>