archlinux_bonding
This is an old revision of the document!
Table of Contents
Archlinux - LACP 802.3AD Bonding / VLANs
~~TOC~~
Configure bonding with netctl
- Make sure you can access the server over serial.
- Configure LACP on your switch.
- Edit /etc/modprobe.d/bonding.conf:
options bonding mode=802.3ad miimon=100
- Create /etc/netctl/bonding:
Description='Bond Interface' Interface='bond0' Connection=bond BindsToInterfaces=('eno1' 'enp4s0' 'enp2s0f0' 'enp2s0f1') IP=no
- Enable the new profile, for example:
netctl enable bonding
- Test bonding mode:
less /proc/net/bonding/bond0
Add VLANs
- Create /etc/netctl/vlan10, for example:
Interface=bond0.10 Connection=vlan BindsToInterfaces=bond0 VLANID=50 IP=static Address="192.168.0.100/24" Gateway="192.168.0.1" DNS=("192.168.0.2") Hostname="myhost" DNSDomain="mydomain.com" DNSSearch="mydomain.com"
archlinux_bonding.1417430335.txt.gz · Last modified: 2014/12/01 10:38 by admin