archlinux_serial_console
This is an old revision of the document!
Table of Contents
Archlinux - serial console
~~TOC~~
Configure serial console
- Configure BIOS, enable Serial Over LAN (SOL) redirection, settings: 115k2, 8n1.
- Edit /etc/default/grub:
GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=ttyS2,115200n8" ## Serial console GRUB_TERMINAL=serial GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=2 --word=8 --parity=no --stop=1"
- Rebuild the grub.cfg file with following command:
grub-mkconfig -o /boot/grub/grub.cfg
- Reboot.
Test serial connection
- SSH to ipmi address.
- Open SOL:
cd system1/sol1 start
- To exit, press: <enter> <esc> <T>.
archlinux_serial_console.1417427097.txt.gz · Last modified: 2014/12/01 09:44 by admin