Ben's notes

Linux, Unix, network, radio...

User Tools

Site Tools

Trace:
cisco_ccna

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
cisco_ccna [2014/08/11 11:00] – admincisco_ccna [2014/08/11 11:23] – [7.0 Troubleshooting (20%)] admin
Line 69: Line 69:
     - auto-configuration     - auto-configuration
  
 +====4.0 IP Routing Technologies (20%)====
 +  - Describe basic routing concepts
 +    - packet forwarding
 +    - router lookup process
 +    - Process Switching/Fast Switching/CEF
 +  - Configure and verify utilizing the CLI to set basic Router configuration
 +    - hostname
 +    - local user and password
 +    - enable secret password
 +    - console & VTY logins
 +    - exec-timeout
 +    - service password encryption
 +    - interface IP Address
 +      - (i)loopback
 +    - banner
 +    - motd
 +    - copy run start
 +  - Configure and verify operation status of a device interface
 +    - Serial
 +    - Ethernet
 +  - Verify router configuration and network connectivity using
 +    - ping
 +      - (i) extended
 +    - traceroute
 +    - telnet
 +    - SSH
 +    - sh cdp neighbors
 +  - Configure and verify routing configuration for a static or default route given specific routing requirements
 +  - Differentiate methods of routing and routing protocols
 +    - Static vs. dynamic
 +    - Link state vs. distance vector
 +    - next hop
 +    - ip routing table
 +    - Passive Interfaces (how they work)
 +    - Admin distance
 +    - split horizon
 +    - metric
 +  - Configure and verify OSPF
 +    - Benefit of single area
 +    - Configure OSPv2
 +    - Configure OSPv3
 +    - Router ID
 +    - Passive Interface
 +    - Discuss multi-area OSPF
 +    - Understand LSA types and purpose
 +  - Configure and verify interVLAN routing (Router on a stick)
 +    - sub interfaces
 +    - upstream routing
 +    - encapsulation
 +  - Configure SVI interfaces
 +  - Manage Cisco IOS Files
 +    - Boot Preferences
 +    - Cisco IOS Images (15)
 +    - Licensing
 +      - Show license
 +      - Change license
 +  - Configure and verify EIGRP (single AS)
 +  - Feasible Distance/Feasible Successors/Administrative distance
 +  - Feasibility condition
 +  - Metric composition
 +  - Router ID
 +  - Auto summary
 +  - Path Selection
 +  - Load Balancing
 +    - (i) Unequal
 +    - (ii) Equal
  
-2 +====5.0 IP Services (10%)==== 
-0 +  - Configure and verify DHCP (IOS Router) 
-% +    - Configuring router interfaces to use DHCP 
-4.0 +    - DHCP options (Basic overview and functionality) 
-IP Routing Technologies +    - Excluded addresses 
-4.1 +    - Lease time 
-Describe basic routing concepts +  - Describe the types, features, and applications of ACLs 
-4.1.a +    - standard (editing and sequencenumbers) 
-packet forwarding +    - extended 
-4.1.b +    - named 
-router lookup process +    - numbered 
-4.1.c +    - Log option 
-Process Switching/Fast Switching/CEF +  - Configure and verify ACLs in a network environment 
-4.2 +    - named 
-Configure and verify utilizing the CLI to set basic Router configuration +    - numbered 
-4.2.a +    - Log option 
-hostname +  - Identify the basic operation of NAT 
-4.2.b +    - purpose 
-local user +    - pool 
-and +    - static 
-password +    - 1 to 1 
-4.2.c +    - overloading 
-enable secret password +    - source addressing 
-4.2.d +    - one way NAT 
-console & VTY logins +  - Configure and verify NAT for given network requirements 
-4.2.e +  - Configure and verify NTP as a client 
-exec +  - Recognize High availability (FHRP) 
-- +    - VRRP 
-timeout +    - HSRP 
-4.2.f +    - GLBP 
-service password encryption +  - Configure and verify syslog 
-4.2.g +    - Utilize syslog output 
-i +  - Describe SNMP v2 and v3
-nterface IP Address +
-4. +
-2.g +
-(i) +
-loopback +
-4.2.h +
-banner +
-4.2.i +
-motd +
-4.2.j +
-copy run start +
-4.3 +
-Configure and verify operation status of a device interface +
-4.3.a +
-Serial +
-4.3.b +
-Ethernet +
-4.4 +
-Verify router configuration and network connectivity using +
-4.4.a +
-ping +
-4.4.a (i) +
-extended +
-4.4.b +
-traceroute +
-4.4.c +
-telnet +
-4.4.d +
-SSH +
-4.4.e +
-sh cdp neighbors +
-4.5 +
-Configure and verify routing configuration for a static or default route given specific +
-routing requirements +
-4.6 +
-Differentiate methods of routing and routing protocols +
-4.6.a +
-Static vs. +
-d +
-ynamic +
-4.6.b +
-Link state vs. +
-d +
-istance +
-v +
-ector +
-4.6.c +
-next hop +
-4.6.d +
-ip routing table +
-4.6.e +
-Passive Interfaces (how they work) +
-2013 Cisco Systems, Inc. This document is +
-Cisco Public. +
-Page +
-4 +
-4.6.f +
-Admin +
-d +
-istance +
-4.6.g +
-split horizon +
-4.6.h +
-metric +
-4.7 +
-Configure and verify OSPF +
-4.7. +
-a +
-B +
-enefit of single area +
-4.7. +
-b +
-Configure OSPv2 +
-4.7.c +
-Configure OSPv3 +
-4.7.d +
-Router ID +
-4.7.e +
-Passive Interface +
-4.7.f +
-D +
-iscuss multi +
-- +
-area OSPF +
-4.7.g +
-Understand LSA types and purpose +
-4.8 +
-Configure and verify interVLAN routing (Router on a stick) +
-4.8.a +
-sub interfaces +
-4.8.b +
-upstream routing +
-4.8.c +
-encapsulation +
-4.9 +
-Configure SVI interfaces +
-4 +
-. +
-10 +
-Manage Cisco IOS Files +
-4.10 +
-.a +
-Boot Preferences +
-4.10 +
-.b +
-Cisco IOS Images (15) +
-4.10 +
-.c +
-Licensing +
-4.10. +
-c (i) +
-S +
-how license +
-4.10 +
-.c +
-(ii) +
-C +
-hange license +
-4.11 +
-Configure and verify EIGRP (single AS) +
-4.11 +
-.a +
-Feasible +
-Distance/Feasible Successors/A +
-dministrative +
-distance +
-4.11 +
-.b +
-Feasibility condition +
-4.11 +
-.c +
-Metric composition +
-4.11 +
-.d +
-Router ID +
-4.11 +
-.e +
-A +
-uto summary +
-4.11 +
-.f +
-Path Selection +
-4.11 +
-.g +
-Load Balancing +
-4.11.g +
-(i) +
-Unequal +
-4.11 +
-.g (ii) +
-Equal +
-10% +
-5.0 +
-IP Services +
-5.1 +
-Configure and verify DHCP (IOS Router) +
-5.1.a +
-C +
-onfiguring router interfaces to use DHCP +
-5.1.b +
-DHCP options (Basic overview and functionality) +
-5.1.c +
-E +
-xcluded addresses +
-5.1.d +
-L +
-ease time +
-5.2 +
-Describe the types, features, and applications of ACLs +
-5.2.a +
-standard (editing and sequence +
-number +
-s) +
-5.2.b +
-extended +
-2013 Cisco Systems, Inc. This document is +
-Cisco Public. +
-Page +
-5 +
-5.2.c +
-named +
-5.2.d +
-numbered +
-5.2.e +
-Log option +
-5.3 +
-Configure and verify ACLs in a network environment +
-5.3. +
-a +
-named +
-5.3.b +
-numbered +
-5.3.c +
-Log option +
-5.4 +
-Identify the basic operation of NAT +
-5.4.a +
-purpose +
-5.4.b +
-pool +
-5.4.c +
-static +
-5.4.d +
-1 to 1 +
-5.4.e +
-overloading +
-5.4.f +
-source addressing +
-5.4.g +
-one way NAT +
-5.5 +
-Configure and verify NAT for given network requirements +
-5.6 +
-Configure and verify NTP as a client +
-5.7 +
-Recognize High availability (FHRP) +
-5.7 +
-.a +
-VRRP +
-5.7 +
-.b +
-HSRP +
-5.7 +
-.c +
-GLBP +
-5.8 +
-Configure and verify +
-s +
-yslog +
-5.8 +
-.a +
-Utilize +
-s +
-yslog +
-o +
-utput +
-5.9 +
-Describe SNMP v2 +
-and +
-v3 +
-. +
-10% +
-6.0 +
-Network Device Security +
-6.1 +
-Configure and verify network device security features +
-6.1.a +
-Device +
-p +
-assword security +
-6.1.b +
-E +
-nable secret vs. +
-enable +
-6.1.c +
-Transport +
-6.1.c.1 +
-disable telnet +
-6.1.c.2 +
-SSH +
-6.1. +
-d +
-VTYs +
-6.1.e +
-physical security +
-6.1.f +
-service password +
-6.1.g +
-D +
-escribe external authentication methods +
-6.2 +
-Configure and verify Switch Port Security +
-6.2.a +
-Sticky +
-MAC +
-6.2.b +
-MAC +
-address limitation +
-6.2.c +
-static/dynamic +
-2013 Cisco Systems, Inc. This document is +
-Cisco Public. +
-Page +
-6 +
-6.2.d +
-violation modes +
-6.2.d (i) +
-err disable +
-6.2.d +
-(ii) +
-shutdown +
-6.2.d +
-(iii) +
-protect restrict +
-6.2.e +
-S +
-hutdown unused ports +
-6.2.f +
-err disable recovery +
-6.2.g +
-A +
-ssign unused ports in unused VLANs +
-6.2.h +
-P +
-utting Native VLAN to other than +
-VLAN 1 +
-6.3 +
-Configure and verify ACLs to filter network traffic +
-6.4 +
-Configure and verify ACLs to limit telnet and SSH access to the router +
-20 +
-% +
-7.0 +
-Troubleshooting +
-7.1 +
-Troubleshoot and correct common problems associated with IP addressing and host +
-configurations +
-7.2 +
-Troubleshoot and +
-r +
-esolve VLAN problems +
-7.2.a +
-I +
-dentify that VLANs are configured +
-7.2.b +
-V +
-erify port membership correct +
-7.2.c +
-C +
-orrect IP address configured +
-7.3 +
-Troubleshoot and +
-r +
-esolve trunking problems on Cisco switches +
-7.3.a +
-V +
-erify +
-correct trunk states +
-7.3.b +
-V +
-erify correct encapsulation configured +
-7.3.c +
-C +
-orrect +
-VLAN +
-s allowed +
-7.4 +
-Troubleshoot and +
-r +
-esolve ACL issues +
-7.4.a +
-V +
-erify statistics +
-7.4.b +
-V +
-erify permitted networks +
-7.4.c +
-V +
-erify direction +
-7.4.c (i) +
-I +
-nterface +
-7.5 +
-Troubleshoot and +
-r +
-esolve Layer 1 problems +
-7.5.a +
-Framing +
-7.5.b +
-CRC +
-7.5.c +
-Runts +
-7.5.d +
-Giants +
-7.5.e +
-Dropped +
-p +
-ackets +
-7.5.f +
-Late +
-c +
-ollisions +
-7.5.g +
-Input +
-/ +
-o +
-utput errors +
-7.6 +
-Identify and correct common network problems +
-7. +
-7 +
-Troubleshoot and +
-r +
-esolve +
-s +
-panning +
-t +
-ree +
-operation issues +
-7. +
-7 +
-.a +
-V +
-erify root switch +
-7. +
-7 +
-.b +
-V +
-erify priority +
-7. +
-7 +
-.c +
-V +
-erify mode is correct +
-2013 Cisco Systems, Inc. This document is +
-Cisco Public. +
-Page +
-7 +
-7. +
-7 +
-.d +
-V +
-erify port states +
-7. +
-8 +
-Troubleshoot and +
-r +
-esolve routing issues +
-7. +
-8 +
-.a +
-V +
-erify routing is enabled (sh ip protocols) +
-7. +
-8 +
-.b +
-V +
-erify routing table is correct +
-7. +
-8 +
-.c +
-V +
-erify correct path selection +
-7. +
-9 +
-Troubleshoot and +
-r +
-esolve OSPF problems +
-7. +
-9 +
-.a +
-V +
-erify neighbor +
-adjacencies +
-7. +
-9 +
-.b +
-V +
-erify +
-h +
-ello and +
-d +
-ead timers +
-7. +
-9 +
-.c +
-V +
-erify OSPF area +
-7. +
-9 +
-.d +
-V +
-erify interface MTU +
-7. +
-9 +
-.e +
-V +
-erify network types +
-7. +
-9 +
-.f +
-V +
-erify neighbor states +
-7. +
-9 +
-.g +
-Review OSPF topology table +
-7.1 +
-0 +
-Troubleshoot and +
-r +
-esolve EIGRP problems +
-7.1 +
-0 +
-.a +
-V +
-erify neighbor adjacencies +
-7.1 +
-0 +
-.b +
-V +
-erify AS +
-number +
-7.1 +
-0 +
-. +
-c +
-V +
-erify load balancing +
-7.1 +
-0 +
-.d +
-S +
-plit horizon +
-7.1 +
-1 +
-Troubleshoot and +
-r +
-esolve interVLAN routing problems +
-7.1 +
-1 +
-.a +
-V +
-erify +
-connectivity +
-7.1 +
-1 +
-.b +
-V +
-erify encapsulation +
-7.1 +
-1 +
-.c +
-V +
-erify subnet +
-7.1 +
-1 +
-.d +
-V +
-erify native +
-VLAN +
-7.1 +
-1 +
-.e +
-P +
-ort mode trunk status +
-7.1 +
-2 +
-Troubleshoot and +
-r +
-esolve WAN implementation issues +
-7.1 +
-2 +
-.a +
-Serial interfaces +
-7.1 +
-2 +
-.b +
-F +
-rame relay +
-7.1 +
-2 +
-.c +
-PPP +
-7.1 +
-3 +
-Monitor NetFlow +
-statistics +
-7.1 +
-4 +
-TS +
-E +
-ther +
-C +
-hannel problems +
-10% +
-8 +
-.0 +
-WAN Technologies +
-8 +
-.1 +
-Identify different WAN Technologies +
-8 +
-.1.a +
-M +
-etro ethernet +
-8 +
-.1.b +
-VSAT +
-8 +
-.1.c +
-C +
-ellular 3g/4g +
-8 +
-.1.d +
-MPLS +
-8 +
-.1.e +
-T1/E1 +
-8 +
-.1.f +
-ISDN +
-8 +
-.1.g +
-DSL +
-8 +
-.1.h +
-F +
-rame relay +
-2013 Cisco Systems, Inc. This document is +
-Cisco Public. +
-Page +
-8 +
-8 +
-.1.i +
-C +
-able +
-8.1.j +
-VPN +
-8 +
-.2 +
-Configure and verify a basic WAN serial connection +
-8 +
-.3 +
-Configure and verify a PPP connection between Cisco routers +
-8 +
-.4 +
-Configure and verify +
-f +
-rame +
-r +
-elay on Cisco routers +
-8 +
-.5 +
-Implement and troubleshoot PPPoE+
  
 +==== 6.0 Network Device Security (10%)====
 +  - Configure and verify network device security features
 +    - Device and password security
 +    - Enable secret vs. enable
 +    - Transport
 +      - disable telnet
 +      - SSH
 +    - VTYs
 +    - physical security
 +    - service password
 +    - Describe external authentication methods
 +  - Configure and verify Switch Port Security
 +    - Sticky MAC
 +    - MAC address limitation
 +    - static/dynamic
 +    - violation modes
 +      - (i) err disable
 +      - (ii) shutdown
 +      - (iii) protect restrict
 +    - Shutdown unused ports
 +    - err disable recovery
 +    - Assign unused ports in unused VLANs
 +    - Putting Native VLAN to other than VLAN 1
 +  - Configure and verify ACLs to filter network traffic
 +  - Configure and verify ACLs to limit telnet and SSH access to the router
 +
 +====7.0 Troubleshooting (20%)====
 +  - Troubleshoot and correct common problems associated with IP addressing and host configurations
 +  - Troubleshoot and resolve VLAN problems
 +    - Identify that VLANs are configured
 +    - Verify port membership correct
 +    - Correct IP address configured
 +  - Troubleshoot and resolve trunking problems on Cisco switches
 +    - Verify correct trunk states
 +    - Verify correct encapsulation configured
 +    - Correct VLANs allowed
 +  - Troubleshoot and resolve ACL issues
 +    - Verify statistics
 +    - Verify permitted networks
 +    - Verify direction
 +      - (i) Interface
 +  - Troubleshoot and resolve Layer 1 problems
 +    - Framing
 +    - CRC
 +    - Runts
 +    - Giants
 +    - Dropped packets
 +    - Late collisions
 +    - Input/output errors
 +  - Identify and correct common network problems
 +  - Troubleshoot and resolve spanning tree operation issues
 +    - Verify root switch
 +    - Verify priority
 +    - Verify mode is correct
 +    - Verify port states
 +  - Troubleshoot and resolve routing issues
 +    - Verify routing is enabled (sh ip protocols)
 +    - Verify routing table is correct
 +    - Verify correct path selection
 +  - Troubleshoot and resolve OSPF problems
 +    - Verify neighbor adjacencies
 +    - Verify hello and dead timers
 +    - Verify OSPF area
 +    - Verify interface MTU
 +    - Verify network types
 +    - Verify neighbor states
 +    - Review OSPF topology table
 +  - Troubleshoot and resolve EIGRP problems
 +    - Verify neighbor adjacencies
 +    - Verify AS number
 +    - Verify load balancing
 +    - Split horizon
 +  - Troubleshoot and resolve interVLAN routing problems
 +    - Verify connectivity
 +    - Verify encapsulation
 +    - Verify subnet
 +    - Verify native VLAN
 +    - Port mode trunk status
 +  - Troubleshoot and resolve WAN implementation issues
 +    - Serial interfaces
 +    - Frame relay
 +    - PPP
 +  - Monitor NetFlow statistics
 +  - TS EtherChannel problems
 +
 +====8.0 WAN Technologies (10%)====
 +  - Identify different WAN Technologies
 +    - Metro ethernet
 +    - VSAT
 +    - Cellular 3g/4g
 +    - MPLS
 +    - T1/E1
 +    - ISDN
 +    - DSL
 +    - Frame relay
 +    - Cable
 +    - VPN
 +  - Configure and verify a basic WAN serial connection
 +  - Configure and verify a PPP connection between Cisco routers
 +  - Configure and verify frame relay on Cisco routers
 +  - Implement and troubleshoot PPPoE
cisco_ccna.txt · Last modified: 2021/10/09 15:14 by 127.0.0.1