configure_scs_tracker_linux
Table of Contents
SCS Tracker / DSP TNC - configuration using Wine
This is based on Fedora.
Info
Configure Wine and the TNC
- Add your account the
dialout
group.sudo usermod -a -G dialout <user>
- Install wine.
sudo dnf install wine
- Download and extract SCS Tracker software, for example
fw1_6.zip
andTRConfig.exe
.mkdir ~/Downloads/SCS mv TRConfig.exe ~/Downloads/SCS cd SCS unzip ../fw1_6.zip
- Run the software for the first time. Wine will other required software:
wine TRConfig.exe
- Exit
TRConfig
(No, then Abbrechen). - Lookup serial device (ttyUSB0 in this example):
ls -l /dev/serial/by-id/*SCS* lrwxrwxrwx. 1 root root 13 Feb 11 11:36 /dev/serial/by-id/usb-SCS_SCS_Tracker___DSP_TNC_PTXZ6ZLZ-if00-port0 -> ../../ttyUSB0
- Create a new symbolic link to ttyUSB0, for example com5:
ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com5
- Edit the registry:
vi ~/.wine/system.reg [Hardware\\Devicemap\\Serialcomm] 1231984861 "Serial5"="COM5"
- Now you can start the software again and configure TRConfig using COM5.
configure_scs_tracker_linux.txt · Last modified: 2021/10/09 15:14 by 127.0.0.1