Ben's notes

Linux, Unix, network, radio...

User Tools

Site Tools


hp_p222_configuration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
hp_p222_configuration [2016/05/13 14:16] – [Enable drive write cache] adminhp_p222_configuration [2016/05/13 14:17] admin
Line 5: Line 5:
 ====Show RAID config==== ====Show RAID config====
 Add 'detail' to the command below for more detail. Add 'detail' to the command below for more detail.
-<code># hpacucli ctrl slot=1 show config+<code># hpssacli controller slot=1 show config
  
 Smart Array P222 in Slot 1                (sn: PDSXH0BRH6E0ZP) Smart Array P222 in Slot 1                (sn: PDSXH0BRH6E0ZP)
Line 22: Line 22:
        
 ====Show status==== ====Show status====
-<code># hpacucli ctrl slot=1 show status+<code># hpssacli controller slot=1 show status
  
 Smart Array P222 in Slot 1 Smart Array P222 in Slot 1
Line 31: Line 31:
 //CAUTION: Because physical drive write cache is not battery-backed, you could lose data if a power failure occurs during a write process. To minimize this possibility, use a backup power supply"// //CAUTION: Because physical drive write cache is not battery-backed, you could lose data if a power failure occurs during a write process. To minimize this possibility, use a backup power supply"//
  
-  * First get current cache status: <code># hpacucli ctrl slot=1 show config detail |grep -i cache+  * First get current cache status: <code># hpssacli controller slot=1 show config detail |grep -i cache
    Cache Serial Number: PBKUA0BRH6E54G    Cache Serial Number: PBKUA0BRH6E54G
    Wait for Cache Room: Disabled    Wait for Cache Room: Disabled
Line 43: Line 43:
    Cache Backup Power Source: Capacitors    Cache Backup Power Source: Capacitors
    Cache Module Temperature (C): 35</code>    Cache Module Temperature (C): 35</code>
-  * Enable drive write cache: <code># hpacucli ctrl slot=1 modify dwc=enable+  * Enable drive write cache: <code># hpssacli controller slot=1 modify dwc=enable
  
 Warning: Without the proper safety precautions, use of write cache on physical  Warning: Without the proper safety precautions, use of write cache on physical 
hp_p222_configuration.txt · Last modified: 2021/10/09 15:14 by 127.0.0.1