Ben Stienstra

Linux, Unix, network, radio and more...

User Tools

Site Tools


hp_p222_configuration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
hp_p222_configuration [2016/05/13 16:16]
admin [Enable drive write cache]
hp_p222_configuration [2016/05/13 16:17] (current)
admin
Line 5: Line 5:
 ====Show RAID config==== ====Show RAID config====
 Add '​detail'​ to the command below for more detail. Add '​detail'​ to the command below for more detail.
-<​code># ​hpacucli ctrl slot=1 show config+<​code># ​hpssacli controller ​slot=1 show config
  
 Smart Array P222 in Slot 1                (sn: PDSXH0BRH6E0ZP) Smart Array P222 in Slot 1                (sn: PDSXH0BRH6E0ZP)
Line 22: Line 22:
        
 ====Show status==== ====Show status====
-<​code># ​hpacucli ctrl slot=1 show status+<​code># ​hpssacli controller ​slot=1 show status
  
 Smart Array P222 in Slot 1 Smart Array P222 in Slot 1
Line 31: Line 31:
 //CAUTION: Because physical drive write cache is not battery-backed,​ you could lose data if a power failure occurs during a write process. To minimize this possibility,​ use a backup power supply"//​ //CAUTION: Because physical drive write cache is not battery-backed,​ you could lose data if a power failure occurs during a write process. To minimize this possibility,​ use a backup power supply"//​
  
-  * First get current cache status: <​code># ​hpacucli ctrl slot=1 show config detail |grep -i cache+  * First get current cache status: <​code># ​hpssacli controller ​slot=1 show config detail |grep -i cache
    Cache Serial Number: PBKUA0BRH6E54G    Cache Serial Number: PBKUA0BRH6E54G
    Wait for Cache Room: Disabled    Wait for Cache Room: Disabled
Line 43: Line 43:
    Cache Backup Power Source: Capacitors    Cache Backup Power Source: Capacitors
    Cache Module Temperature (C): 35</​code>​    Cache Module Temperature (C): 35</​code>​
-  * Enable drive write cache: <​code># ​hpacucli ctrl slot=1 modify dwc=enable+  * Enable drive write cache: <​code># ​hpssacli controller ​slot=1 modify dwc=enable
  
 Warning: Without the proper safety precautions,​ use of write cache on physical ​ Warning: Without the proper safety precautions,​ use of write cache on physical ​
hp_p222_configuration.txt ยท Last modified: 2016/05/13 16:17 by admin