Differences

This shows you the differences between two versions of the page.

--- huawei_mu609_gps_mode [2014/12/27 19:58] – [Huawei MU609 GPS mode] admin
+++ huawei_mu609_gps_mode [2017/05/28 06:43] – admin
@@ Line 3: / Line 3: @@
 ~~NOTOC~~
 ====Documentation=====
-See the following documentation for more examples:
+See the following documentation for more information:
+  * Huawei MU609 miniPCIe {{::huawei_20mu609_20mini_20pcie_20module_20hardware_20guide-_28v200r001_02_2c_20english_29.pdf|Hardware guide}}.
   * Huawei MU609 miniPCIe {{:huawei_mu609_hspa_lga_module_at_command_interface_specification-_v100r002_04_english_.pdf|AT command spec.}}
   * Huawei MU609 miniPCIe {{::huawei_20mu609_20hspa_20lga_20module_20application_20guide-_28v100r002_02_2c_20english_29.pdf|Application guide}}.
+    * **ttyUSB0**: MODEM port: simulated using USB, for AT command interaction and establishing data connection.
+    * **ttyUSB1**: DIAG port: simulated using USB, for DIAG (diagnostic) command interaction (mainly used to debug modules at present).
+    * **ttyUSB2**: PCUI port: simulated using USB, for AT command interaction only.
+    * **ttyUSB3**: GPS NMEA port: simulated using USB, sending unsolicited indications for NMEA positioning data only.
+    * **ttyUSB4**: GPS Control port: simulated using USB, for GPS AT command interaction only.
+    * **eth3**: ECM port: for establishing communication connection.
 ====Standalone example=====