pcengines_apu2_update_firmware_rom
This is an old revision of the document!
Table of Contents
PCEngines APU2 - BIOS Update
Download files
- Download latest BIOS: https://pcengines.github.io/
- Download TinyCore http://pcengines.ch/file/apu2-tinycore6.4.img.gz
Prepare bootable USB drive
- Make sure the USB drive is not mounted (
lsblkormountcommand). - Write TinyCore and BIOS image to USB:
gunzip apu2-tinycore6.4.img.gz sudo dd if=apu2-tinycore6.4.img of=/dev/sdX bs=4k sudo mount /dev/sdX1 /mnt sudo tar zxf apu2_v4.6.9.rom.tar.gz -C /mnt sudo umount /mnt
Update BIOS
- Connect USB drive to APU2
- Connect APU2 via serial:
screen /dev/ttyUSB0 115200
- Connect power
- Update BIOS, needed to force it, because difference in names: (PC Engines:PC Engines apu2):
# cd /media/SYSLINUX # flashrom --programmer internal:boardmismatch=force -w apu2_v4.6.9.rom flashrom v0.9.8-r1888 on Linux 3.16.6-tinycore (i686) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. coreboot table found at 0xdffae000. Found chipset "AMD FCH". Enabling flash write... OK. Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) mapped at physical address 0xff800000. This coreboot image (PC Engines:PC Engines apu2) does not appear to be correct for the detected mainboard (PC Engines:PCEngines apu2). Proceeding anyway because user forced us to. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED.
pcengines_apu2_update_firmware_rom.1527874425.txt.gz · Last modified: 2018/06/01 17:33 by admin