Differences

This shows you the differences between two versions of the page.

--- rpi3_pi_supply_kali [2017/06/08 21:00] – admin
+++ rpi3_pi_supply_kali [2017/06/09 11:11] – [Raspberry Pi 3 - Kali and Pi Supply switch (GPIO)] admin
@@ Line 6: / Line 6: @@
 {{::img_6098.jpg?nolink&400|}}
-  * First, do not connect the switch yet, it will power off shortly after booting, and you'll have a go with fsck :-/
+  * First, do __not__ connect the switch yet, it will power off shortly after booting, and you'll have a go with fsck :-/
   * Install required packages:<code>sudo apt-get install python-pip curl</code>
   * Install the RPi.GPIO module:<code>sudo pip install RPi.GPIO</code>
   * Download (read) the script and install:<code>wget https://pisupp.ly/piswitchcode
 ./piswitchcode</code>
+  * Connect the switch. Boot the RPi.
+  * Now you can safely shutdown the RPI using the Pi Supply switch.