ubuntu_gns3
This is an old revision of the document!
Table of Contents
~~TOC~~
Ubuntu - GNS3
Prerequisites
- Install Ubuntu 14.04.1 LTS.
- Configure Security & Privacy settings.
- Configure networking.
- Install OpenSSH server.
- Install and configure NTP.
- Install git, cmake.
Install dynamips
- Install prerequisites:
apt-get install libelf-dev uuid-dev libpcap0.8-dev
- Compile and install:
git clone git://github.com/GNS3/dynamips.git cd dynamips mkdir build cd build cmake .. make sudo make install
Install gns3-server
- Install pip:
sudo apt-get install python3-pip
- Install pyzmq:
sudo apt-get install python3-zmq
- Install tornado:
sudo apt-get install python3-tornado
- Install netifaces:
sudo apt-get install python3-netifaces
- Install gns3-server:
git clone https://github.com/GNS3/gns3-server.git cd gns3-server sudo python3 setup.py install
Install gns3-gui
- Install:
git clone https://github.com/GNS3/gns3-gui.git
- Install PyQt:
sudo apt-get install python3-pyqt4 cd gns3-gui sudo python3 setup.py install gns3
ubuntu_gns3.1412583403.txt.gz · Last modified: 2014/10/06 08:16 by admin