huawei_mu609_send_sms
Huawei MU609 - send SMS
Documentation
Read the following documentation for more information:
- Huawei MU609 miniPCIe Hardware guide.
- Huawei MU609 miniPCIe AT command spec.
- Huawei MU609 miniPCIe Application guide.
- ttyUSB0: MODEM port: simulated using USB, for AT command interaction and establishing data connection.
- ttyUSB1: DIAG port: simulated using USB, for DIAG (diagnostic) command interaction (mainly used to debug modules at present).
- ttyUSB2: PCUI port: simulated using USB, for AT command interaction only.
- ttyUSB3: GPS NMEA port: simulated using USB, sending unsolicited indications for NMEA positioning data only.
- ttyUSB4: GPS Control port: simulated using USB, for GPS AT command interaction only.
- eth3: ECM port: for establishing communication connection.
Serial connection
- Connect to the device:
screen /dev/ttyUSB0 9600
Send SMS using AT commands
- optional: Reset the mobile terminal (MT):
at+cfun=1,1
- Wait for the MT to come back and reconnect.
huawei_mu609_send_sms.1495979548.txt.gz · Last modified: 2017/05/28 13:52 by admin