intel_edison
This is an old revision of the document!
~~TOC~~
Intel Edison breakout board - getting started
Jumpers / connectors
- J3 = USB FTDI serial-to-USB (external power needed)
- J16 = USB OTG. If you plug a micro A cable into this port, the Intel® Edison module will connect to a PC as the host; if you plug a micro B cable into this port, the Intel® Edison module will connect to the PC as a device.
- J21 = main power input, 7 to 15 VDC.
intel_edison.1418150132.txt.gz · Last modified: 2014/12/09 18:35 by admin