Ben's notes

Linux, Unix, network, radio...

User Tools

Site Tools

Trace:
qnap_tr_004

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
qnap_tr_004 [2021/11/13 20:57] – adminqnap_tr_004 [2021/11/14 11:26] (current) – admin
Line 18: Line 18:
 </code> </code>
  
 +==== QNAP TR-004 No UAS ====
 +It seems this device does not support UAS, but uses the slower usb-storage driver.
 +<code>
 +lsusb -t
 +/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
 +    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
 +</code>
 ==== Monitoring S.M.A.R.T. status ==== ==== Monitoring S.M.A.R.T. status ====
 It is possible to monitor the SMART attributes, but not the status, as can be seen in the output below. It is possible to monitor the SMART attributes, but not the status, as can be seen in the output below.
Line 42: Line 49:
 # Disks are selected by the number following 'jmb39x-q,' not the device name. # Disks are selected by the number following 'jmb39x-q,' not the device name.
  
-# smartctl -a -d jmb39x-q,0 /dev/sdc+smartctl -a -d jmb39x-q,0 /dev/sdc
 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-9-amd64] (local build) smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-9-amd64] (local build)
 Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
qnap_tr_004.txt · Last modified: 2021/11/14 11:26 by admin